【催全球丨经贸资讯 7月11日 周四】
1、美国:公布第六批关税排除清单,将豁免110种中国进口商品
7月9日,美国贸易代表办公室(USTR)发布了最新一批加征关税排除产品清单通知,具体执行时间未定,USTR将在45天-90天内在联邦公报中公布。通知批准110项(产品主要为医疗设备和电子元件等)针对美国对华301征税340亿清单的产品排除申请。
▼USTR发布排除清单通知
排除清单如下
序号 | 税号 | 产品说明 |
1 | 8402.90.0010 | Heat exchangers, the foregoing comprising parts of goods of heading 8402 and each fitted for heat recovery steam generator |
2 | 8402.90.0090 | Drums, exhaust stacks, and inlet duct panel assemblies of heat recovery steam generators |
3 | 8402.90.0090 | Water tanks for steam or other vapor generating boilers |
4 | 8408.90.9010 | Compression-ignition engines with maximum power exceeding 50 kW but not exceeding 120 kW, each valued over $6,000 but not over $9,500 per unit |
5 | 8408.90.9020 | Compression-ignition engines, exceeding 149.2 kW but not exceeding 373 kW and valued over $9,800 but not over $12,000 |
6 | 8411.99.9090 | Aircraft gas turbine compressor cases of steel and Inconel alloy, each valued over $3,000 but not over $4,000 |
7 | 8411.99.9090 | Engine stationary seal air supports of Inconel alloy, each measuring over 35 cm but not over 35.5 cm in outer diameter and over 3.5 cm but not over 4 cm in width |
8 | 8412.39.0080 | Direct acting and spring return pneumatic actuators, each rated at a maximum pressure of 10 bar and valued over $68 but not over $72 per unit |
9 | 8412.80.1000 | Spring-operated motors, each valued over $3,000 but not over $3,600 |
10 | 8413.60.0030 | Gear-type hydraulic fluid power pumps, handheld, battery powered, the foregoing not over 5 cm in width and valued not over $6 per unit |
11 | 8413.70.2015 | Centrifugal water pumps incorporating thermal cut-offs, each with discharge outlet 5.08 cm or more in diameter, valued over $66 but not over $72 per unit |
12 | 8413.91.9010 | Motor vehicle oil pump housings |
13 | 8413.91.9095 | Impellers |
14 | 8413.91.9095 | Parts of oil and gas extraction beam pumps, other than hydraulic power pumps |
15 | 8413.91.9095 | Pedestals of pump assemblies |
16 | 8413.91.9095 | Pump bases, of plastic, designed to protect the pump impellers from obstructions |
17 | 8413.91.9095 | Pump casings and bodies |
18 | 8413.91.9095 | Pump covers |
19 | 8413.91.9095 | Pump expellers |
20 | 8413.91.9095 | Pump grease cups and grease cup adapters |
21 | 8413.91.9095 | Pump liners |
22 | 8413.91.9095 | Pump manifolds |
23 | 8413.91.9095 | Pump parts, of plastics, each valued not over $3 |
24 | 8413.91.9095 | Pump shaft castings, of steel |
25 | 8413.91.9095 | Pump throatbushes |
26 | 8413.91.9095 | Pump volutes |
27 | 8413.91.9095 | Structural pump bases, of stainless steel |
28 | 8414.30.8030 | Compressors, other than screw type, used in air conditioning equipment in motor vehicles, each valued over $88 but not over $92 per unit |
29 | 8414.30.8050 | Compressors, other than screw type, of a kind used in household refrigerators, air conditioners and heat pumps, rated at more than 1⁄4 horsepower but not more than 1 horsepower, each valued not over $150 |
30 | 8427.20.8090 | Fork-lift trucks, propane gas powered, having a rated lift capacity over 9.5 metric tons but not exceeding 33 metric tons |
31 | 8429.20.0000 | Motor grader weighing more than 14 metric tons but not over 21 metric tons |
32 | 8429.40.0040 | Self-propelled pneumatic compactors, each weighing over 14 metric tons but not over 28 metric tons |
33 | 8429.51.1015 | New articulated shovel loaders, wheeled, each with 4-wheel drive, rear mounted engine and a bucket capacity of under 1.5 m3, rated at not over 26 horsepower |
34 | 8429.51.1040 | Integrated tractor shovel loaders, each with 4 wheel drive, a bucket capacity of at least 3.8 m3 but less than 5.2 m3 and an operating weight of 17.5 metric tons or more but not over 20 metric tons |
35 | 8429.51.1045 | Shovel loaders with an operating weight of from 30 metric tons to 36 metric tons |
36 | 8429.51.1050 | Shovel loaders with an operating weight of from 30 metric tons to 36 metric tons |
37 | 8429.51.5010 | Rubber track shovel loaders having a lift capacity not over 375 kg |
38 | 8431.10.0010 | Grooved wire rope drum valued over $350 |
39 | 8431.31.0040 | Escalator drive assemblies consisting of a motor, planetary gear and gearbox |
40 | 8431.31.0040 | Escalator steps |
41 | 8431.31.0060 | Parts of passenger or freight elevators consisting of any of the following: Elevator emergency brake and speed governor apparatus, scissor lift assemblies, telescoping boom lift assemblies or articulating boom lift assemblies |
42 | 8431.39.0070 | Counterweights for log handling equipment |
43 | 8431.49.9044 | Backhoe counterweights each weighing more than 400 kg but not more than 600 kg |
44 | 8431.49.9044 | Excavator crawler shoes |
45 | 8432.90.0060 | Seeder or spreader baffle and baffle assemblies |
46 | 8432.90.0060 | Seeder or spreader frames |
47 | 8432.90.0060 | Seeder or spreader handles |
48 | 8432.90.0060 | Seeder or spreader hopperassemblies |
49 | 8432.90.0060 | Seeder or spreader hopper grates |
50 | 8432.90.0060 | Seeder or spreader impellers |
51 | 8436.80.0090 | Chipper/shredder machines,electrically powered |
52 | 8436.80.0090 | Chipper/shredder machines,gasoline powered, valued less than $250 per unit |
53 | 8436.80.0090 | Malt production equipment |
54 | 8458.19.0020 | Horizontal lathes, electrically powered not over 1.5 horsepower |
55 | 8474.90.0010 | Feeder and vibratory flow equipment and parts thereof designed for use in screening or sorting machines; housings and noise reduction enclosures; |
56 | 8479.30.0000 | Press machines for bamboo or other materials of a woody nature |
57 | 8479.81.0000 | Electric wire coil-winder machines |
58 | 8479.82.0040 | Insulated mixing chambers of stainless steel, each having a capacity of 5 m3 to 25 cubic meters |
59 | 8481.30.2090 | Check valves of steel having an internal diameter not less than 4.8 cm or exceeding 62.5 cm |
60 | 8481.90.9060 | Bodies of pressure-reducing valves other than hand-operated or check valves and valves classified in 8481.20, such bodies of brass |
61 | 8481.90.9060 | Bodies of valves other than hand-operated or check valves and valves classified in 8481.20, such bodies measuring over 18 cm but not exceeding 19 cm in length, valued over $55 but not over $65 per unit |
62 | 8482.10.5016 | Flanged wheel hub bearing units with ball bearings, each having an inner diameter exceeding 2.2 cm but not exceeding 2.8 cm |
63 | 8482.10.5024 | Wheel hub angular contact bearing units, not flanged, valued over $2 but not over $10 per unit |
64 | 8482.99.0500 | Inner bearing rings |
65 | 8483.40.9000 | Non-toothed gears for office printers, each valued not over $7 |
66 | 8483.50.9080 | Non-grooved pulleys, each incorporating a deep groove roller bearing |
67 | 8483.50.9080 | Non-grooved pulleys, zinc plated, each valued not over $3 |
68 | 8483.90.8080 | Hubs for conveyor pulleys with an outside diameter of more than 5 cm but not more than 56 cm |
69 | 8487.90.0080 | Handles for machinery |
70 | 8501.10.4060 | Electric motors of a width exceeding 7.5 cm but not exceeding 7.8 cm |
71 | 8501.31.2000 | DC motors, each valued over $125, with attached stranded copper cord |
72 | 8501.53.4080 | AC motors, multi-phase, each of an output exceeding 75 kW but less than 149.2 kW |
73 | 8501.62.0000 | AC generators, each weighing over 250 kg but not more than 1 metric ton and valued not over $2,400 |
74 | 8504.33.0020 | Transformers designed to control horizontal motion of electron beams in cathode-ray tubes |
75 | 8504.90.9650 | Static converter covers, bases and housings |
76 | 8514.90.8000 | Furnace casings |
77 | 8514.90.8000 | Structural components for industrial furnaces |
78 | 8515.19.0000 | Manually operated rework stations, including soldering/desoldering stations |
79 | 8515.39.0020 | Machines and apparatus for arc (including plasma arc welding, each valued not over $500 |
80 | 8525.60.1030 | Hand-held transceivers (except Citizen’s Band and except low- power radiotelephonic operating on frequencies from 49.82 MHz to 49.90 MHz, valued not over $70 each |
81 | 8532.10.0000 | Fixed capacitors valued not over $4 per unit |
82 | 8532.10.0000 | Fixed oil-filled capacitors rated at 1 kV to 25 kV |
83 | 8532.21.0050 | Tantalum capacitors having a conductive polymer cathode, valued not over $4 per unit |
84 | 8532.21.0050 | Tantalum capacitors, each measuring 7.3 mm by 4.3 mm by 1.9 mm and valued not over $4 |
85 | 8532.22.0085 | Aluminum electrolytic capacitors, each valued not over $2.50 |
86 | 8536.41.0045 | Contactors, for a voltage not exceeding 60 V and with contacts rated at or more than 10 A, each valued not over $18 |
87 | 8536.50.9025 | Rotary switches, rated at over 5 A, measuring not more than 5.5 cm by 5.0 cm by 3.4 cm, each with 2 to 8 spade terminals and an actuator shaft with D-shaped cross section |
88 | 8536.50.9025 | Rotary switches, single pole, single throw (SPST, rated at over 5 A, each measuring not more than 14.6 cm by 8.9 cm by 14.1 cm |
89 | 8536.50.9031 | Momentary contact switches rated at or under 5 A, each designed for use as a motor vehicle overdrive switch |
90 | 8536.50.9031 | Momentary contact switches rated at or under 5 A, valued not over $4 per unit |
91 | 8536.50.9065 | Rocker switches, for a voltage not exceeding 1,000 V, designed for use in motor vehicles |
92 | 8538.90.6000 | Molded buttons |
93 | 8538.90.6000 | Molded housings and covers |
94 | 8538.90.8120 | Tanks for dead tank circuit breakers, of aluminum |
95 | 8543.30.9080 | Aluminum anodes for use with machines and apparatus for electroplating, electrolysis or electrophoresis |
96 | 8543.30.9080 | Chlorine generator chambers containing titanium plates for use with machines and apparatus for electroplating, electrolysis or electrophoresis |
97 | 8543.30.9080 | Zinc anodes for use with machines and apparatus for electroplating, electrolysis or electrophoresis |
98 | 9015.80.8080 | Weather station sets, each consisting of a monitoring display and outdoor weather sensors, having a transmission range of not over 140 m and valued not over $50 per set |
99 | 9018.12.0000 | Veterinary ultrasound device with black-and-white image quality used as a medical diagnostic tool |
100 | 9018.90.6000 | Microwave ablation antennas,whether or not with attached controls, as parts of ablation systems used to ablate live tumors |
101 | 9018.90.6000 | Parts and accessories of electro-surgical instruments and appliances, other than extracorporeal shock wave lithotripters |
102 | 9018.90.6000 | Smoke evacuation pencils with accompanying tubing and hoses designed to integrate smoke evacuation into electrosurgery by combining both features into a single handpiece, which is designed to apply mono-polar electrosurgical energy to target tissue in a surgical setting while simultaneously evacuating smoke from the surgical site |
103 | 9018.90.6000 | Suction coagulators, consisting of a hand-piece with mechanical and/ or electrical controls and a disposable shaft, used for the coagulation of tissue and aspiration of fluids during surgical procedures |
104 | 9018.90.6000 | Vessel sealing and dividing devices that use electrical energy to separate and seal tissue during open or laparoscopic surgical procedures, consisting of a handpiece with mechanical and/or electrical controls, and a bipolar electrode intended to deliver electrosurgical current from a system generator directly to tissues for cutting/ coagulation/ablation |
105 | 9022.90.6000 | Dental X-ray alignment and positioning apparatus, each valued over $5,000 |
106 | 9022.90.6000 | Multi-leaf collimators of radiotherapy systems based on the use of X-ray |
107 | 9022.90.6000 | Overhead tube suspension used to hold and position X-ray generating equipment |
108 | 9027.80.4530 | Instruments and apparatus that chemically analyze food to detect the presence of gluten or peanuts, valued at less than $55 per unit |
109 | 9030.39.0100 | Picoammeters with recording devices |
110 | 9032.89.6070 | Humidistats, each with outdoor sensor, such humidistats valued not over $40 each |
2、10月1日起,21类产品正式纳入CCC强制认证
7月9日,国家市场监督管理总局发布关于防爆电气等产品由生产许可转为强制性产品认证管理实施要求的公告,公告指出:
1.自2019年10月1日起,防爆电气、家用燃气器具和标定容积500L以上家用电冰箱纳入CCC认证管理范围,各指定认证机构开始受理认证委托。
2.各省级市场监管部门停止受理相关生产许可证申请,已受理的依法终止行政许可程序。
3.自2020年10月1日起,以上产品未获得强制性产品认证证书和未标注强制性认证标志,不得出厂、销售、进口或在其他经营活动中使用。
3、沙特:8月起SABER强制列表再新增5类产品
自2019年8月1日起,以下五类产品必须使用SABER系统提交申请并取得相关的证书:
1. Technical regulation for electrical self balancing boards (scooters).
电动自动平衡板/车(滑板车)
2. Technical regulation for front, rear and side barriers for trucks and trailers.
卡车和拖车的前、后、侧栏
3. Technical regulation for degradable plastic products.
可降解塑料产品
4. Technical regulation for electrical batteries.
电池
5. Technical regulation for paints (dyes) and varnishes.
油漆(染料)和清漆
沙特标准局SASO官方网站:www.saso.org.sa
SABER认证系统地址(仅供进口商或代理认证机构注册使用):https://saber.sa/
4、澳大利亚:码头工人罢工,4大主要港口受影响
7月8日(本周一),澳大利亚各地的DP World码头工人发起罢工。布里斯班码头工人罢工48小时为起点,弗里曼特尔、墨尔本和悉尼港的工人则宣布将在本周的周三至周五陆续开始罢工示威,要求其作业场所安全、工人尊严以及工作本身能够得到保障。该次罢工将致8日到14日(本周末)的到港的货物面临延误。
5、美国:商务部将解禁对华为供货
根据多家西方媒体报道,美国商务部将允许部分美国企业继续与中国的华为公司做生意,向该公司出售产品。这一消息也得到了美国商务部官方网站的确认。